• Yellow PVC/polyester/PVC apron,
• 36"x45"
• 14 mil thickness

• 100% bonded polypropylene
• tear and puncture-resistant
• Available in blue and white
• 24" and 21" sizing

• Elasticized armbands at both ends
• 18” length protects the arm from heat and abrasion
• Fully washable

• 16” polyethylene sleeve
• elastic at both wrist and elbow. 
• Sold by the case of 1000 pairs.

• 100% Polyolefin
• Hooded
• Zip-Front
• Elastic at wrist, ankle and hood
• Micro-porous coverall that provides barrier protection against dry particulate hazards. Optimal level of protection, durability and comfort

• 100% Polypropylene
• Hooded
• Zip front
• Elastic at wrist, ankle and hood
• Low-cost disposable garment that protects from dirt, grease and grime. Extremely lightweight and breathable. Ideal for non- hazardous work environments
• Available in Navy Blue

• Hazard/Risk Category (HRC) 2
• Arc Thermal Protective Value (ATPV) 9.5 cal/cm2
• CAN/CGSB 155.20-2000 (Canadian FR standard, workwear protection against flash fire)
• Thermal Protective Performance (TPP) value: with spacer 11, contact test 8.2
• ASTM F1506-10a (Performance spec for textiles used in clothing exposed to electrical arc and thermal hazards)
• NFPA 70E (Standard for electrical safety in workplace)

• 100% 9 oz. Pre-shrunk Cotton, FR treated, twill weave
• 100% Polyester FR thread
• Heavy duty # 5 FR brass zipper on aramid tape
• 2" FR retroreflective tape in CSA configuration
• Double-needle stitching on reflective tape
• Bar-tacked at all stress points
• All metal thermally protected from the skin
• Protective shirt collar
• Storm guard over front zipper with snap closure
• Action back for mobility and elasticized waist sides
• Adjustable wrists and ankles
• 1 flap chest patch pocket on right, with YKK snap closure
• 2 waist patch pockets with side access
• 2 rear hip patch pockets
• Tool pocket on right leg

• Sidesplit cowhide
• Riveted Kevlar-sewn seams
• Reinforced snap front
• Inside pocket
• Adjustable snap cuffs

• Meets CGSB 155.20, 2000
• HRC2
• Arc rating:atpv =20.9 cal/cm2
• ASTM F1506 and NFPA 70E
• Material meets the requirements of NFPA2112-2012 ULcertified
• 100 % cotton 12 oz. fr treated fabric
• Aramid high tenacity FR thread
• Bar-tacked at all stress points
• Adjustable drawstring around hood
• One-way #5 resin zipper on aramid tape
• FR rib knit cuff & waistband
• Removable snap hood
• FR silver retroreflective tape
  
  

BLACK MEETS

• Jacket and bib material is wind & waterproof
• The jacket has a vented back, so you don't get too hot
• Detachable snap hood
• Bib pant has adjustable shoulder straps
• Cut for comfort in the seat
• Snap fly
• Meets CGSB standard 155.20.2000 for flame resistance
• *CFIA accepted for use with food contact

• Jacket and bib material is wind & waterproof
• Jacket has a vented back so you don't get too toasty
• Detachable snap hood
• Bib pant has adjustable shoulder straps
• Cut for comfort in the seat
• Snap fly
• *CFIA accepted for use with food contact

• Heavy duty 12 oz. 100% cotton canvas
• Quilt-lined with 8oz. polyfill insulation
• Flannel lining in body and hood
• Heavy duty brass front zipper
• Knee-height side leg zips
• Elastic back waist
• Two chest and two lower pockets
• Two back pockets and tool loop
• Rib knit storm cuffs
• Elastic strap at leg cuff

• 100% cotton twill
• Covered snap front
• Side slash pockets
• Snap adjustment cuffs
• Two front chest pockets
• Elastic waist on the back
• Two back hip pockets
• Ruler pocket and tool loop

• 60% polyester/40% cotton woven twill
• Lay-down collar
• Side slash pockets
• Adjustable Velcro cuffs.
• Open front with two-way brass zipper
• Loss-proof front chest pockets with pen slot in the left pocket
• Elastic waist on the back
• Two back hip pockets
• Ruler pocket on both legs

• ANSI Approved
• Anti-fog lens coating
• Panoramic field of vision
• Safety spectacles can be worn underneath
• Soft PVC frame and face flange for maximum comfort
• Indirect ventilation permits free air circulation while preventing liquid and particulate contamination
• neoprene strap resists chemicals and solvents

• ANSI approved
• Lightweight, comfortable frame
• Indirect ventilation
• Chemical splash protection
• Impact resistant lens
• Economical pricing

The perfect outer layer, built for propelling water and shielding you and your team from even the fiercest downpour. Our Hi Vis Safety Rain Jacket is seam-sealed to meet rigorous compliance standards and allow you to work in harsh conditions while keeping dry and maintaining unrestricted visibility. It’s insulating yet breathable, and it’s designed to adapt to a range of conditions. If desired, the hood can easily detach once the sun comes out.   

• Total compliance with the newest CSA standard: CSA Z96-15; Orange and Lime meet Class 2 Level 2 and Black meets Class 1 level 2
• Total compliance with the newest ANSI standard: ANSI 107-2015; Orange and Lime meet Type R  Class 3 and Black meets Type 0 Class 1
• 100% polyester oxford, polyurethane coated
• Water-resistant (up to 8000mm) and wind-proof fabric, fully seam-sealed
• Full-length, two-way, heavy-duty front zip with spring-loaded snap closure storm flap
• Adjustable velcro at cuff
• Two lower loss-proof pockets
• Detachable snap-off hood, rib-knit storm cuffs
  
  

ORANGE & LIME MEET	BLACK MEETS

ORANGE & LIME MEET	BLACK MEETS

Long-wearing, low fading hi-vis safety tee, for those work conditions that call for long sleeves. Breathable and comfortable.

• Total compliance with the newest CSA standard: CSA Z96-15; Orange and Lime meet Class 2 Level 2 and Black and Navy meet Class 1 level 2
• Total compliance with the newest ANSI standard: ANSI 107-2015; Orange and Lime meet Type R  Class 3 and Black and Navy meet Type 0 Class 1
• V-neck, long sleeves
• Front chest pocket
• 100% polyester bird_s eye knit fabric is comfortable against the skin and wicks away moisture and perspiration
• Retro-reflective silver tape in 4" contrast fluorescent configuration

ORANGE & LIME MEET	BLACK & NAVY MEET

ORANGE & LIME MEET	BLACK  & NAVY MEETS

• Total compliance with the newest CSA standard: CSA Z96-15; Orange and Lime meet Class 2 Level 2 and Black and Navy meet Class 1 Level 2
• Total compliance with the newest ANSI standard: ANSI 107-2015; Orange and Lime meet Type R  Class 2 and Black and Navy meet Type 0 Class 1
• V-neck and short-sleeves
• Front chest pocket
• 100% polyester birdseye knit fabric is comfortable against the skin and wicks away moisture and perspiration
• Retroreflective silver tape in 4" contrast fluorescent configuration

ORANGE & LIME MEET	BLACK & NAVY MEET

ORANGE & LIME MEET	BLACK & NAVY MEETS

We have created this long-sleeve version of our trademark safety tee shirt. The crew neck version is a vibrant shirt created to provide maximum visibility with its extra-wide, 4” retro-reflective silver tape and bold combination colors. The long sleeve safety tee also comes with a pronounced chest pocket that is ideal for pens, glasses, or other items requiring immediate accessibility.

• Total compliance with the newest CSA standard: CSA Z96-15; Orange and Lime meet Class 2 Level 2 and Black and Navy meet Class 1 level 2
• Total compliance with the newest ANSI standard: ANSI 107-2015; Orange and Lime meet Type R  Class 3 and Black and Navy meet Type 0 Class 1
• Crew-neck, long sleeves with rib-knit cuff
• Front chest pocket
• 100% polyester birdseye knit fabric is comfortable against the skin and wicks away moisture and perspiration
• Retroreflective Silver tape in 4" contrast fluorescent configuration
  
  

ORANGE & LIME MEET	BLACK & NAVY MEETS

ORANGE & LIME MEET	BLACK MEETS